If you already fit boilers and have been thinking about how you get into installing heat pumps, you're closer than you think. You just need to pass one Level 3 course on top of the qualifications you already have. For experienced gas or oil engineers, it typically takes a week or less. In England, you also have access to the Heat Training Grant, which takes up to £500 off the cost.
For experienced engineers, the course is the easy part. The tricky bit is getting the first heat pump in the ground, and finding the right route to grant-funded work without paying for MCS certification when you do between two and five jobs a year. Here's how to get from the course to your first grant job.
The short answer
There are four things you need to install heat pumps in the UK, and that one job that gets you across the line.
Becoming a heat pump installer
Four steps to grant-funded work
- 1Before you bookAn existing trade qualificationA Level 2 or 3 NVQ or SVQ in plumbing, heating, gas or oil, plus a current water regulations certificate
- 2A week or lessA Level 3 heat pump courseInstallation and low temperature design. Up to £500 off with the Heat Training Grant in England
- 3Once trainedJoin a competent person schemeSo you can sign off your own installs against building regulations
- ★The hardest stepFit your first heat pumpStart at Home schemes give you a funded heat pump to fit in your own home
- 4For grant jobsGet a route to MCSYour own MCS certification, or an MCS umbrella. Jobs need one to claim the Boiler Upgrade Scheme grant
What you need before you book a course
Those who run heat pump courses assume you already have a trade, and most will ask for a Level 2 or Level 3 NVQ or SVQ in plumbing, heating and ventilation, gas or oil. They will also ask for a current water regulations certificate. Don't be surprised if they ask for unvented hot water as well, because almost every heat pump job includes a cylinder.
There's no legal list set in stone that all providers follow. They set their own, and MCS adds its own requirements further down the line. Because requirements vary, it's a good idea to do your homework before you book.
The good thing here is that government policy is set up to help heating engineers like you transition onto heat pumps. If you work on gas or oil now, you're in a great place to add another string to your bow.
What a Level 3 heat pump course covers
Most engineers take a Level 3 award in installing and maintaining air source heat pumps, from awarding bodies such as LCL Awards and BPEC. Ground source has its own version, and OFTEC offers a Level 3 award in heat pump design.
You'll also want a low temperature heating and hot water design course. It teaches you to size the system to the home's heat loss, and to set a flow temperature the heat pump can hold efficiently. Most providers sell it separately.
The government says Heat Training Grant courses usually take at least three days. A Level 3 heat pump course takes a week or less for an experienced gas or oil engineer.
New to the trade? The Low Carbon Heating Technician Apprenticeship is a Level 3 route that usually takes three years.
What the training costs, and the £500 grant
The Heat Training Grant takes up to £500 off heat pump training in England. Most providers take it off the course price. Some pay it back once you finish, so ask which before you book.
You can claim it if both of these apply to you:
You work for a business with 250 employees or fewer, you're a sole trader, or you're unemployed.
You, or your employer, belong to a competent person scheme for heating and hot water, such as APHC, BESCA, Blue Flame Certification, Gas Safe Register, Certsure (NICEIC), HETAS, NAPIT, OFTEC or Stroma.
You don't apply to the government. You sign up with a training provider that takes part, and GOV.UK lists them by region. The training has to take place in England.
Some manufacturers have added their own extras for grant trainees, such as further discounts, loyalty points or free extra courses at their training centres. Offers change, so ask the centre what's on before you book.
The grant isn't closing any time soon. The Warm Homes Plan commits £7 million a year to it until March 2029, across heat pump and heat network training.
Join a competent person scheme
Once you're trained, join a competent person scheme for heat pumps. You can then sign off your own installs against building regulations in England and Wales, without calling in building control. APHC, NICEIC (Certsure), NAPIT, OFTEC and BESCA all run one.
Already in a scheme for gas or another technology? Check that your membership covers heat pumps, because it may need updating. Many scheme operators also offer MCS certification, which is your next decision.
The first install: where most people stall
More people train than go on to fit. Over 10,650 people had been through grant-funded training by March 2025. The Warm Homes Plan counts around 10,000 trained and active heat pump installers, and only about 4,000 full-time equivalents once you take out their boiler work. Nesta found the reason: many engineers can't land a first job, so they never build up any work from it.
Start at Home schemes tackle that head-on. You fit a funded heat pump in your own home, with help on the heat loss calculation, the design and commissioning. Nesta tested it in Scotland with SNIPEF and 36 experienced heating engineers. All 18 who fitted one at home said they understood design and installation better afterwards. Manufacturers, suppliers and umbrella operators now run their own versions, and startathome.org.uk lists them side by side.
Ample runs one. Our Start at Home scheme covers the heat pump, design and commissioning support, and a contribution towards your labour.
MCS: certify yourself, or work under an umbrella
To claim the Boiler Upgrade Scheme grant on a job, the install must be MCS certified. You can get there two ways.
MCS for grant jobs
Two routes to MCS
Your own MCS certification
- Whose certification covers the job
- Yours
- What you set up
- A Main Contact, a Licensee and a Technical Supervisor, the right insurance, and an assessment with a certification body
- What you pay
- Certification body fees, every year
- Suits you when
- Heat pumps are a real share of your work
Work under an MCS umbrella
- Whose certification covers the job
- The umbrella operator’s
- What you set up
- Choose an operator that holds MCS certification for your technology and covers your area
- What you pay
- The operator’s fees, so check them up front
- Suits you when
- You’re starting out, or not ready to certify yet
Either way, the workmanship is yours. An umbrella doesn’t train, accredit or certify you.
Your own certification pays off once heat pumps are a real share of your work. Read how much MCS certification costs and how to become MCS certified.
An umbrella suits you if you're not ready to certify yet, and GOV.UK suggests it as an option. Umbrellas differ in how much they do. Some do the design and commissioning themselves and subcontract the install. Others leave the design with you, so ask. Read what an MCS umbrella scheme is before you decide.
Is the switch worth it?
The work is there, and the government is paying for it. The Warm Homes Plan puts £2.7 billion behind the Boiler Upgrade Scheme to 2029/30. The yearly budget rises from £295 million in 2025/26 to £709 million in 2029/30, and the government aims for 450,000 heat pump installs a year by 2030.
Here's what each install can claim right now.
Boiler Upgrade Scheme
Grant per install
| Air-to-water or ground sourceOff-gas-grid homes replacing oil or LPG | £9,000 |
|---|---|
| Air-to-water, ground source or water sourceMost homes | £7,500 |
| Biomass boilerLimited cases | £5,000 |
| Air-to-air*Homes on the gas grid | £2,500 |
The £9,000 rate covers applications made between 21 July 2026 and 31 March 2027. *Check the exact air-to-air product is on the MCS Product Directory before you quote against the grant.
The workforce needs to roughly treble. The Warm Homes Plan expects the industry to need about 12,000 full-time equivalent installers by 2030, against about 4,000 today. The government has also confirmed that MCS will become the only certification scheme for the Boiler Upgrade Scheme.
Cash flow is the harder part for most small firms. On every grant job, you take the full grant off the price before you start, then wait for Ofgem to pay it. Read how the Boiler Upgrade Scheme works for installers for the details.
Where Ample fits in
We don't train or certify anyone. We take on the two things that hold small firms back on heat pump work: the compliance admin and the cash flow.
Every install through Ample is certified through us, whether or not you hold your own MCS certification. We handle the Boiler Upgrade Scheme applications and redemptions, DNO notifications, design review, the Insurance-Backed Guarantee and the handover packs. The system design stays yours.
You're paid within one working day of each confirmed milestone, starting when the project is confirmed. It costs nothing to join. Each job carries a per-project cost, and we show it to you before you start.
To join, you'll need to be a heat pump specialist with the right installation qualification, and pass a basic financial check. We assess every installer, and our technical director makes the final call. If you have gaps to close first, we can point you to technical experts and third-party training providers.
Ready to fit your first heat pump?
See how Ample's MCS umbrella works, look at our Start at Home scheme, or get started when you're ready. There's more in our installer resources. We've got your back on every job.
Frequently asked questions
What qualifications do you need to install heat pumps in the UK?
An existing Level 2 or Level 3 NVQ or SVQ in plumbing, heating and ventilation, gas or oil, plus a current water regulations certificate. Then a recognised Level 3 heat pump qualification that covers installation and low temperature design. Most providers also ask for unvented hot water, so check their entry requirements before you book.
How long does it take to become a heat pump installer?
For an experienced gas or oil engineer, the Level 3 course takes a week or less, and grant-funded courses usually last at least three days. Design courses are booked separately. Getting to grant-funded work takes longer, because you also need a competent person scheme and a route to MCS.
How much does heat pump installer training cost?
Prices vary by provider and technology. In England the Heat Training Grant takes up to £500 off, and some manufacturers add extra discounts or free courses for grant trainees. Ask a provider that takes part for current prices.
Do you need to be MCS certified to install heat pumps?
Not to fit one. But the job must be MCS certified to claim the Boiler Upgrade Scheme grant. You can hold the certification yourself, or work under an MCS umbrella whose certification covers the job.
Can I become a heat pump installer without being a plumber?
Not directly. Heat pump courses expect an existing heating, plumbing, gas or oil qualification. If you're starting from scratch, the three-year Low Carbon Heating Technician Apprenticeship is the way in.
Is the Heat Training Grant still available in 2026?
Yes, in England. The Warm Homes Plan commits £7 million a year to it until March 2029. It takes up to £500 off eligible heat pump training, and you claim it through a training provider that takes part.
What is Start at Home?
A scheme that gives a newly trained engineer a funded heat pump to fit in their own home, with help on heat loss, design and commissioning. Manufacturers, suppliers and umbrella operators run their own versions, and startathome.org.uk compares them.
Is there enough heat pump work to justify retraining?
The government has committed £2.7 billion to the Boiler Upgrade Scheme to 2029/30 and aims for 450,000 installs a year by 2030. The Warm Homes Plan expects the installer workforce to need to treble, from about 4,000 full-time equivalents to about 12,000.
Do I need a competent person scheme as well as MCS?
Yes, because they do different jobs. A competent person scheme lets you sign off building regulations compliance yourself in England and Wales. MCS certification makes the install eligible for the Boiler Upgrade Scheme grant. Many competent person scheme operators also offer MCS certification.
Sources
GOV.UK, Apply for the Heat Training Grant: discounted heat pump training: https://www.gov.uk/government/publications/heat-training-grant-for-heat-pumps
GOV.UK, Warm Homes Plan: https://www.gov.uk/government/publications/warm-homes-plan/warm-homes-plan-html
DESNZ, Boiler Upgrade Scheme summary business case: https://assets.publishing.service.gov.uk/media/69f478f37c02660a84d1ebd7/summary_business_case_boiler_upgrade_scheme.pdf
GOV.UK, Notice of approved grant categories and values for the Boiler Upgrade Scheme: https://www.gov.uk/government/publications/boiler-upgrade-scheme-regulations-approved-standards-grant-categories-and-grant-levels/notice-of-approved-grant-categories-and-values-for-the-boiler-upgrade-scheme
Ofgem, Boiler Upgrade Scheme for installers: https://ofgem.gov.uk/environmental-and-social-schemes/boiler-upgrade-scheme-bus/installers
APHC, The Redeveloped MCS Installer Scheme: https://aphc.co.uk/redeveloped-mcs-installer-scheme/
Nesta, Start at Home for newly trained heat pump installers: https://www.nesta.org.uk/report/start-at-home/
Designing Buildings, Heat Training Grant (training numbers to March 2025): https://www.designingbuildings.co.uk/wiki/Heat_Training_Grant
GOV.UK, Boiler Upgrade Scheme and certification requirements: consultation outcome: https://www.gov.uk/government/consultations/boiler-upgrade-scheme-and-certification-requirements-for-clean-heat-schemes
